Dongguan CNC processing should pay attention to what details

1、 Before Dongguan CNC machining machinery works, check whether the moving parts are full of lubricating oil, then start and check whether the clutch and brake are normal, and let the machine idle for 1-3 minutes. Do not operate the machine in case of failure.

2、 Keep correct posture during CNC processing in Dongguan and have enough spirit to deal with the work. If you feel unwell, you should leave immediately and report to the leader. During operation, we must concentrate, prohibit chatting and cooperate with each other. Operators shall not operate under the state of irritability and fatigue to avoid accidents and ensure safe operation.

3、 During the processing of Dongguan CNC, if the mold needs to be replaced, turn off the power first, and start the installation and commissioning of the mold after the movement part of the punch stops running. After installation and adjustment, move the flywheel by hand for trial punching twice to check whether the upper and lower dies are symmetrical and reasonable, whether the screws are firm and whether the blank holder ring is in a reasonable position.

4、 All other personnel must leave the mechanical working area and take away the sundries on the workbench before starting the power supply and starting the machinery.

5、 When Dongguan CNC machining machinery is working, it is strictly prohibited to reach into the slider working area and hold and place the workpiece by hand. When taking and placing the workpiece in the die, standard tools must be used. In case of abnormal sound or machine fault, please turn off the power switch immediately for inspection. After the machine is started, one person shall carry materials and operate the machine. Others shall not press the electrical building or step on the foot switch board, nor extend their hands into the working area of the machine or touch the moving parts of the machine with their hands.

6、 When off duty, turn off the power supply and sort out the finished products, wastes and sundries on the post to ensure the cleanliness and safety of Dongguan CNC processing working environment.