Basic safety requirements for mechanical equipment in CNC processing

The basic safety requirements of mechanical equipment in CNC processing are mainly the reasonable layout of mechanical equipment, which is convenient for operators to load and unload workpieces, process observation and remove sundries. At the same time, Yaoyao is convenient for maintenance personnel to check and repair. The strength and stiffness of parts and components of mechanical equipment in CNC processing shall meet the safety requirements, and shall be firmly installed without failure.

According to the relevant safety requirements, the mechanical equipment in CNC processing must be equipped with reasonable, reliable safety devices that do not affect the operation. For example:

1. For the parts and components rotating in CNC processing, protective shields or protective baffles, protective railings and other safety protection devices shall be installed to avoid stranding.

2. For the parts and components that can cause dangerous accidents such as overpressure, overload, over temperature, over time and over travel in CNC processing, safety devices shall be installed. Whenever dangerous situations occur, the role of the safety devices shall eliminate the dangerous situations, so as to prevent accidents.

3. When people need to be warned or reminded of some actions in CNC processing, signal devices or warning signs should be installed.

4. Interlocking devices shall be installed for some parts and components whose action sequence cannot be reversed in CNC processing. That is, an action can only be performed after the previous action is completed, otherwise it is impossible.